News classification
Contact us
- Add: Liaoning Province Dalian Zhongshan shines Street No. 33 Honglin building room 2713
- Tel: 0411-39830567
- Fax: 0411-39830567
- Email: 693030666@qq.com
Dalian solar generator set controller working mode
Dalian solar generator set controller working mode
Dalian solar generator set controller working mode:
Setting: press the switch button for 5 seconds, model (MODE) display digital LED scintillator, release the button, every time a digital conversion, digital until LED digital display on the mode corresponding to user selected from table of the stop button, wait until the LED figures do not flicker to complete set. Each time you press the button, LED digital light, can be observed in the value set.
Pure light "0" mode: when there is no sunlight, the light intensity is reduced to the starting point, the controller recognizes the start signal after 10 minutes, open load, load begins to work; when the sun, the light intensity increase to start point, time delay 10 minutes to confirm closing the output signal after the closure of the output, load stop working.
Light control + delay ("1" and "9", "0" and "5"): start with. When the work load to the set time to off load, time setting the table. Optically controlled priority.
General controller mode "6": the only way to cancel the light control, function, output delay and related functional control, retain all other functions, used as a universal controller general.
"7" debugging: debug for system use, and the same pure lighting control mode, only to cancel the judgement of light signal control the output of the 10min delay, retain all other functions. The light signal is connected to load, no light signal off load, convenient installation and commissioning inspection system installation is correct.
Output mode: in the LED digital tube display mode setting value, digital display with no decimal point namely "0" to "9" and "0" to "5" mode when the output is DC DC output. If the number with no decimal point namely "0" to "9", the digital tube decimal point does not shine
Setting: press the switch button for 5 seconds, model (MODE) display digital LED scintillator, release the button, every time a digital conversion, digital until LED digital display on the mode corresponding to user selected from table of the stop button, wait until the LED figures do not flicker to complete set. Each time you press the button, LED digital light, can be observed in the value set.
Pure light "0" mode: when there is no sunlight, the light intensity is reduced to the starting point, the controller recognizes the start signal after 10 minutes, open load, load begins to work; when the sun, the light intensity increase to start point, time delay 10 minutes to confirm closing the output signal after the closure of the output, load stop working.
Light control + delay ("1" and "9", "0" and "5"): start with. When the work load to the set time to off load, time setting the table. Optically controlled priority.
General controller mode "6": the only way to cancel the light control, function, output delay and related functional control, retain all other functions, used as a universal controller general.
"7" debugging: debug for system use, and the same pure lighting control mode, only to cancel the judgement of light signal control the output of the 10min delay, retain all other functions. The light signal is connected to load, no light signal off load, convenient installation and commissioning inspection system installation is correct.
Output mode: in the LED digital tube display mode setting value, digital display with no decimal point namely "0" to "9" and "0" to "5" mode when the output is DC DC output. If the number with no decimal point namely "0" to "9", the digital tube decimal point does not shine